View B39202B8650P810_9075494.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer wcdma band 2 series/type: ordering code: b8650 B39202B8650P810 date: version: mar 20, 2015 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n saw duplexer for mobile telephonewcdma band ii systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz features n package size 1.8 x 1.4 mm 2 n max. package height 0.475 mm n rohs compatible n approx. weight 0.0042g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.475 max. 0.7 pin configuration n 3 tx input n 1 rx output n 6 antenna n 2, 4, 5, 7,8 to be grounded 2,4,5 1 3 6 7,8
3 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w ll 9.1 nh tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. center frequency f c 1880 mhz maximum insertion attenuation a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). @f carrier 1852.4 ... 1907.6 mhz 2.0 3.5 db @f carrier 1852.4 ... 1907.6 mhz 1.8 2) 2.3 2) 2) valid for t=+ 65 ?c db amplitude ripple (p-p) da wcdma 1) @f carrier 1852.4 ... 1907.6 mhz 1.0 2.5 db @f carrier 1852.4 ... 1907.6 mhz 0.8 2) 2.3 2) db error vector magnitude evm 3) 3) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 1852.4 ... 1907.6 mhz 1.4 6.5 % @f carrier 1852.4 ... 1907.6 mhz 1.0 2) 3.5 2) % input vswr (tx port) 1850.0 ... 1910.0 mhz 1.4 2.0 1850.0 ... 1910.0 mhz 1.4 2) 2.0 2) output vswr (ant port) 1850.0 ... 1910.0 mhz 1.5 2.1 1850.0 ... 1910.0 mhz 1.5 2) 2.0 2)
4 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w ll 9.1 nh tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. absolute attenuation a 10.0 ... 728.0 mhz 30 35 db 704.0 ... 716.0 mhz 30 35 db 728.0 ... 764.0 mhz 30 35 db 777.0 ... 787.0 mhz 30 35 db 869.0 ... 894.0 mhz 33 36 db 1226.0 ... 1250.0 mhz 40 43 db 1605.886 ... 1680.0 mhz 40 43 db @f carrier 1932.4 ...1987.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 28 49 db @f carrier 1932.4 ...1987.6 mhz a wcdma 1) 45 2) 2) valid for t=+ 65 ?c 50 2) db 2010.0 ... 2025.0 mhz 35 38 db 2110.0 ... 2155.0 mhz 40 43 db 2350.0 ... 2360.0 mhz 37 40 db 2400.0 ... 2500.0 mhz 32 35 db 3700.0 ... 3820.0 mhz 17 20 db 4900.0 ... 5850.0 mhz 5 10 db 5254.0 ... 5455.0 mhz 5 10 db 5520.0 ... 5845.0 mhz 18 23 db 5540.0 ... 5950.0 mhz 15 21 db
5 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w ll 9.1 nh tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. center frequency f c 1960 mhz maximum insertion attenuation a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). @f carrier 1932.4 ... 1987.6 mhz 2.9 4.5 db @f carrier 1932.4 ... 1987.6 mhz 2.5 2) 2) valid for t=+ 65 ?c 3.1 2) db amplitude ripple (p-p) da wcdma 1) @f carrier 1932.4 ... 1987.6 mhz 1.2 2.9 db @f carrier 1932.4 ... 1987.6 mhz 0.8 2) 2.5 2) db error vector magnitude evm 3) 3) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 1932.4 ... 1987.6 mhz 2.5 10.0 % @f carrier 1932.4 ... 1987.6 mhz 1.4 2) 4.5 2) % input vswr (ant port) 1930.0 ... 1990.0 mhz 1.4 2.0 1930.0 ... 1990.0 mhz 1.4 2) 2.0 2) output vswr (rx port) 1930.0 ... 1990.0 mhz 1.5 2.0 1930.0 ... 1990.0 mhz 1.5 2) 2.0 2) imd product level limits 4) 4) imd product level limits for power levels p tx =21.5 dbm (antenna port output power) and p blocker =-15dbm (antenna port input power). at f tx =1880mhz, f rx =1960mhz blocker 1 80.0 mhz -107 -97 dbm blocker 2 1880.0 mhz -108 -98 dbm blocker 3 3840.0 mhz -118 -108 dbm blocker 4 5720.0 mhz -129 -109 dbm
6 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w ll 9.1 nh tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 1850.0 mhz 39 42 db 80.0 mhz 60 70 db 699.0 ... 716.0 mhz 45 48 db 777.0 ... 787.0 mhz 44 47 db 824.0 ... 849.0 mhz 43 46 db 1770.0 ... 1830.0 mhz 44 47 db @f carrier 1852.4. .. 1907.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 45 52 db @f carrier 1852.4. .. 1907.6 mhz a wcdma 1) 47 2) 2) valid for t=+ 65 ?c 50 2) db 1910.0 ... 1915.0 mhz 10 27 db 2005.0 ... 2050.0 mhz 3 20 db 2050.0 ... 2075.0 mhz 26 29 db 2075.0 ... 6000.0 mhz 26 29 db 2305.0 ... 2315.0 mhz 38 41 db 2400.0 ... 2500.0 mhz 38 41 db 3780.0 ... 3900.0 mhz 48 51 db 3860.0 ... 3980.0 mhz 48 51 db 3980.0 ... 6000.0 mhz 43 48 db 4900.0 ... 5950.0 mhz 43 48 db 5610.0 ... 5845.0 mhz 43 48 db 5630.0 ... 5810.0 mhz 43 48 db 5790.0 ... 5970.0 mhz 43 48 db
7 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w rx terminating impedance: z rx = 50 w ll 9.1 nh tx terminating impedance: z tx = 50 w characterisitcs tx - rx min. typ. @ 25 ?c max. isolation a 1574.0 ... 1577.0 mhz 53 61 db @f carrier 1852.4 ... 1898.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 52 57 db @f carrier 1898.6 ... 1907.6 mhz a wcdma 1) 46 49 db @f carrier 1852.4 ... 1898.6 mhz a wcdma 1) 52 2) 2) valid for t=+ 65 ?c 57 2) db @f carrier 1898.6 ... 1907.6 mhz a wcdma 1) 46 2) 50 2) db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 37 53 db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 50 2) 56 2) db 3700.0 ... 3820.0 mhz 44 52 db 5550.0 ... 5850.0 mhz 51 59 db
8 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 2-passband, f carrier ranges from 1852.4mhz (lowest tx channel) to 1907.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state acc. to iec 60068-2-67 cy v esd voltage v esd 50 2) 2) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model input power p in source and load impedance 50 w 1852.4 ... 1907.6 mhz elsewhere 2810 dbmdbm wcdma up signalt = 50?c, 5000 h s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd h rrc f ( ) 2 f 1 = d }
9 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (power transfer function) frequency response rx-ant (power transfer function)
10 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant (power transfer function) frequency response tx-ant (wideband)
11 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response rx-ant (power transfer function) frequency response rx-ant (wideband)
12 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx (power transfer function) frequency response tx-rx (wideband)
13 mar 20, 2015 b8650 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswr s 11 tx- port s 22 ant-port s 33 rx-port
14 mar 20, 2015 b8650 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8650 ordering code B39202B8650P810 marking and package c61157-a8-a87 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8650_nb_un.s3p, b8650_wb_un.s3psee file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2015. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
15 mar 20, 2015 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, exocore, filtercap, formfit, leaxield, miniblue, minicell, mkd, mkk, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B8650P810

	To Download B39202B8650P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .